BFLHK - ENAMEL ALKYD S.G. GRAY 26134 (745612)
- MSDS: BFLHK
- Manufacturer: PRATT AND LAMBERT
- Product Name: ENAMEL ALKYD S.G. GRAY 26134 (745612)
- National Stock Number: 8010-00-680-2410
Product Identification
Product ID:ENAMEL ALKYD S.G. GRAY 26134 (745612)
MSDS Date:01/01/1987
FSC:8010
NIIN:00-680-2410
MSDS Number: BFLHK
Responsible Party
WICHITA, KS 67201
US
Cage: PRATT
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
SILICA, CRYSTALLINE - CRISTOBALITE
CAS: 14464-46-1
RTECS: VV7325000
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.05 MG/M3 RDUST9293
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
TITANIUM DIOXIDE
RTECS: XR2100000
ACGIH TLV: 10 MG/CU.M
IRON OXIDE
CAS: 1332-37-2
RTECS: NO7380000
ACGIH TLV: 10 MG/CU.M
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:ANESTHETIC MAY CAUSE IRRITATION OF NOSE &
THROAT NERVOUS SYSTEM DAMAGE
First Aid
First Aid:IF SWALLOWED INDUCE VOMITING REMOVE TO FRESH AIR GIVE
ARTIFICIAL RESPIRATION IF REQUIRED FLUSH EYES WITH LARGE AMOUNTS OF
WATER SKIN-WASH AFFECTED AREA WITH SOAP AND WATER
Fire Fighting
Flash Point:80F(27C)
Extinguishing Media:CLASS B FIRE EXTINGUISHERS
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED ISOLATE
FROM HEAT CLOSED CONTAINERS WILL EXPLODE IN EXTREME HEAT
Accidental Release
Spill Release Procedures:KEEP SPECTORS AWAY ELIMINATE ALL IGNITION
SOURCES DIKE AND CONTAIN SPILL WITH INERT MATERIAL PUT LIQUIDS IN
COVERED METAL CONTAINERS FOR RECOVERY OR DISPOSAL PREVENT
CONTAMINATION OF SEWERS STREAMS AN D GROUNDWATER WITH SPILLED
MATERIAL OR USED ABSORB
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F STORE LARGE
QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106
Other Precautions:DO NOT TAKE INTERNALLY CLOSE CONTAINER AFTER USE
EMPTY CONTAINERS MUST NOT BE WASHED OR REUSED NEVER USE PRESSURE TO
EMTPY
Exposure Controls
Respiratory Protection:MECH FILTR RESPIRAT TO REMOV SOLID AIR BORNE
PARTICLES OF OVERSPRAY.
Ventilation:PROVIDE GENERAL DILUTION AND LOCAL EXHAUST VENTILATION
Protective Gloves:IMPERMEABLE
Eye Protection:WEAR SAFETY GLASSES
Other Protective Equipment:NONE REQUIRED
Supplemental Safety and Health
MSDS DATE:3/51/86; INGRED. CONTD:MINERAL SPIRITS,CAS.# 8032-32-4, %
N/K,TLV 100 PPM;
Chemical Properties
Boiling Pt:B.P. Text:244F
Vapor Pres:5
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:57
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:BURNING WILL PRODUCE SMOKE CARBON
MONOXIDE AND DIOXIDE
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL STATE AND
LOCAL LAWS BURN IN EPA PERMITTED FACILITY ONLY DO NOT INCINERATE
CLOSED CONTAINERS OBSERVE PRECAUTIONS FOR DISPOSAL OF FLAMMABLE
MATERIALS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.